Char d’Assaut Schneider CA1
Testbericht des 1:72 Modells von Reviresco
In 1915, the French Schneider company purchased two American Holt crawler tractors. The 45 hp model (the „Baby Holt“), fitted with mock-up armour covering the engine und driver’s position was first demonstrated to General Petain. In 1916 a new Fahrzeug based on the Holt tractor was designed. The front of the Fahrzeug was shaped like a boat’s bow with a barbed-wire cutting beam attached to it. The rear of the Fahrzeug contained two doors, allowing the crew to enter und exit. The engine was located at the left front, next to the driver. 90 rounds of ammunition for the main gun were carried.
The Char Schneider, as it was called, first saw action on 16 April, 1917, at Chemin des Dames. Of a total of 132 Schneider tanks employed, 57 were destroyed, und many were damaged beyond repair. Many losses were due to exploding fuel tanks, which were located next to the hull MG positions. Other noticeable flaws involved inadequate armour, poor ventilation, und lack of egress on the left side. Later improvements included additional armour plating to protect the crew against German „K“ type armour-piercing bullets. About 400 Schneider tanks were built, but the Fahrzeug proved unsatisfactory, und it was to be replaced by tanks of British design, had the War not ended in 1918.
Inhalt
- Char d’Assaut Schneider CA1
- Länge: 6.32 m
- Breite: 2.05 m
- Höhe: 2.30 m
- Gewicht: 14,6 t
- Panzerung: 11,5 mm maximal
- Bewaffnung: 75 mm Haubitze, 8 mm MG auf beiden Rumpfseiten
- Geschwindigkeit: 7.5 km/h auf Straßen
- Fahrbereich: 48 km
Bewertung
The Schneider is a nice addition to have in one’s collection, especially since the major injection kit companies do not produce many vehicles of this period.
Metal 1:72 scale kit consisting of 16 parts. Instructions, which include a photograph of the parts, are included.
The completed kit comes out feeling quite heavy, it seems very rugged, und suitable for tabletop wargaming.
The fit was not 100 %, und I had to figure out the best sequence of assembly in order to make the gaps least noticable. It wasn’t until after the tracks were attached that I noticed the Fahrzeug was slightly tilted downward on the left front side.
Parts are at times bulky, und probably oversized, i.e the MGs und the wire-cutting beam seem to be too thick. The beam should probably have a sharper leading edge, so purists will want to file down or replace this part.
Historische Verwendung
- French Army, Western Front 1917–1918
Interessante Umbauten
- Unarmed supply carrier version
- Char d’assaut Schneider CA2 with turret-mounted 47 mm gun; prototype only.
The Char Schneider is a valuable Fahrzeug for collectors und wargamers interested in World-War One. Tanks of the period had attractive camouflage patterns und markings that are easy to reproduce in miniature.
Patrick Storto